Self Binding Gravel Calculator

Self-Binding Gravel Calculator

10% suits most jobs. Go higher for awkward shapes or uneven ground.

Key Takeaways

  • Type in the length, width and finished depth of your path or drive, and the calculator gives you the tonnes to order and the number of 850kg bags. The extra stone lost under the compactor is already accounted for, so the only thing to add is a wastage allowance, for dips and spills.
  • Type in the depth you want once the gravel is flattened with the compactor, not the depth you rake out. Before compacting, you rake it out about half as deep again: about 75mm for a 50mm path.
  • One 850kg bulk bag of self-binding gravel covers about 8.5m² at 50mm finished. The stone lost under the compactor is already counted in those figures.
  • A self-binding path is 50mm finished, and a self-binding drive is 100 to 150mm finished, built in layers of 50mm so each one compacts right through.
  • Self-binding gravel goes straight onto 75 to 100mm of compacted MOT Type 1 on a path, or 150mm on a drive, with nothing between the two layers.

Self-binding gravel is the one loose material we sell that you do not order by the depth you spread. You order it by the depth it finishes at, and the coverage figure has the compaction built in. The calculator above does that sum for you. The rest of this page is the working, in case you're interested.

Golden self binding gravel path what you need

How Much Self-Binding Gravel Do I Need?

A 5m by 4m drive in Golconda at 100mm finished needs about 4.4 tonnes with 10% spare, which is six 850kg bulk bags with 700kg left over. That is the figure our calculator gives, and the sum behind it is short.

  1. Area in square metres. 5m × 4m = 20m².
  2. Finished depth in metres. 100mm = 0.1m, so 20m² × 0.1m = 2.0m³ of finished surface.
  3. Weight. Limestone self-binding gravel takes about 2,000kg for every cubic metre of finished surface, because 1 tonne covers 10m² at 50mm. 2.0m³ × 2,000kg = 4,000kg.
  4. Wastage. Add 10% for the odd dip and the bit that gets scuffed off the edges. 4,400kg, or 4.40 tonnes.
  5. Bags. 4,400kg ÷ 850kg = 5.2, so six bags.

The one thing I would ask you to check twice is the finished depth. The calculator adds the extra stone lost under the compactor for you. If you type in the loose depth you plan to spread, you will over-order by half.

Buff self binding gravel dry wet

How Far Does a Tonne of Self-Binding Gravel Go?

A tonne of self-binding gravel covers about 10m² at 50mm finished. Those are the figures I use for every product we sell, and the table below turns them into bags.

Self-binding gravel coverage at 50mm finished
Product Stone Per tonne at 50mm finished Per 850kg bag at 50mm finished Spread this deep for 50mm finished
Golconda Self-Binding Gravel Dolomitic limestone, 0 to 10mm About 10m² About 8.5m² About 75mm
Golden Self-Binding Gravel Limestone, 0 to 10mm About 10m² About 8.5m² About 75mm
Red Self-Binding Gravel Limestone, 0 to 10mm About 10m² About 8.5m² About 75mm

Double the depth and you halve the coverage, so at 100mm on a drive a bag of Golconda does about 4.2m². None of the three come in mini bags, so the calculator only ever offers the 850kg bag. If the answer runs past ten tonnes, the calculator flags it. Call us before you order, because a loose load is usually cheaper than a dozen bags.

How Deep Should Self-Binding Gravel Be?

Self-binding gravel is laid 50mm deep after compacting on a path, patio or courtyard, and 100 to 150mm deep on a drive. The depth you spread before the plate goes over it is about 75mm for every 50mm of finished surface. That gap between loose and finished is the bit that catches people out, and it is the reason the calculator shows a "Spread it this deep" box next to the weight. The weight is the finished sum. The spread figure is how high to rake it before you compact.

The other thing I learned the hard way is that you cannot lay a deep layer in one go. The plate only compacts the top 50mm or so properly, and anything under that stays soft and works loose later. A drive at 100mm goes down as two layers: spread 75mm, damp it, compact to 50mm, then do it again. The calculator says this under the depth box as soon as you type a depth over 50mm.

Give it time to set once it is down. About a week in summer, two weeks or more in a cold wet winter, and gentle use for the first three months. New self-binding gravel sticks to wet shoes and scuffs under a dragged chair or a wheel-spin. Both habits fade as it sets.

Golden self binding path

Can You Use Self-Binding Gravel on a Driveway?

Golconda is the one self-binding gravel we sell that is made for a family car. Golden and Red are path grades, for paths, courtyards, patio surrounds and cycle routes. They are not recommended for a drive. They can still work on one, but the surface will be muddier and need more maintenance. It is your choice, so the calculator still works out a driveway in Golden or Red, and shows that warning when you pick one.

The difference is in the stone. Golconda is a crushed dolomitic limestone that keeps all its dust, and that dust is what locks the surface hard enough for a car to turn on. On a drive it goes down 100mm finished over 150mm of compacted MOT Type 1, in two layers as above. The whole range is compared side by side on the Self-Binding Gravel Range page, if you are still choosing a colour.

Wide driveway light brown self binding

What Goes Under Self-Binding Gravel?

Self-binding gravel sits straight on compacted MOT Type 1: 75 to 100mm of it on a path and 150mm on a drive. Nothing goes between the two layers. If you want a membrane in the build at all, it goes under the sub-base, at the bottom of the dig. I know most online gravel guides tell you to put a membrane under the stone. For loose gravel that is right. For self-binding gravel it is wrong, because the fines in the gravel need to bed into the top of the Type 1 to lock, and a sheet of fabric between them stops that happening. A path laid on a membrane is the loose, dusty one people post photos of a month later.

The sub-base also carries the fall. Self-binding gravel is not free-draining, so the surface has to shed rain sideways: about 1 in 50 across a path, 1 in 40 across a wider area like a courtyard. Water that sits on it softens it into a pothole. The MOT Type 1 Sub-Base Calculator works out the base for you, with its own compaction allowance.

Crushed gravel garden path

Next Steps

Run your measurements through the calculator at the top, then click Take me there to open the product you chose with the figures carried over. We stock Golconda, Golden and Red Self-Binding Gravel in 850kg bulk bags, and we deliver nationwide. If you would rather talk your self-binding gravel order through with us, call Outdoor Aggregates on 0330 043 7585. The office is open 7am to 7pm, seven days a week.

Have you ever laid a self-binding gravel path and ended up a bag short? Which product did you use, and how deep did you spread it before the plate? Let us know in the comments.

Ben parrot avatar

By

|

Modified:

FAQs

Do you need a membrane under self-binding gravel?

Self-binding gravel does not need a membrane under it, and a sheet between the gravel and the sub-base stops the fines bedding in and locking. If you want one in the build, lay it under the MOT Type 1 at the bottom of the dig.

How much does self-binding gravel cost?

An 850kg bulk bag of Golconda Self-Binding Gravel from Outdoor Aggregates costs £158 before delivery, and that bag covers about 8.5m² of path at 50mm finished. Golden is £167 a bag and Red is £164.

Does self-binding gravel work?

Self-binding gravel works when it is laid at 50mm finished on compacted MOT Type 1, dampened and compacted with a plate, and left for a week or two to set. Nine times out of ten the path that failed was spread on a membrane or on bare soil and never had a plate over it.

Will self-binding gravel stick to my shoes?

New self-binding gravel does stick to wet shoes for the first few weeks, until the surface sets. A mat at the door and three months of gentle use sort it, and a path that is still dusty after a summer was either laid too thin or never compacted.

Can you lay self-binding gravel on a slope?

Self-binding gravel holds on a slope up to about 1 in 15. Steeper than that and running water cuts ruts in it, so I would set steps into a longer incline rather than push the gravel up it.

How much extra self-binding gravel should I order?

Self-binding gravel needs about 10% extra for an ordinary rectangle, and 15 to 20% for an awkward shape or uneven ground. The calculator starts on 10% and you can change it with one tap.

DIY Guides

Placeholder

How to avoid the common pitfalls and get great results first time

Fd14b16ee0f7b24bc06b4ef544b3c9bfba65b439ee7a9428e299e0f19d833ecc? S=96&d=mm&r=g
Ben Parrot
Placeholder

Compare the specifications of our top quality self-binding gravel products to find the optimal one for your needs.

Fd14b16ee0f7b24bc06b4ef544b3c9bfba65b439ee7a9428e299e0f19d833ecc? S=96&d=mm&r=g
Ben Parrot
Placeholder

Get the depths, base and drainage right, and a gravel drive will outlast the car parked on it.

Fd14b16ee0f7b24bc06b4ef544b3c9bfba65b439ee7a9428e299e0f19d833ecc? S=96&d=mm&r=g
Ben Parrot

Leave a Reply

Your email address will not be published. Required fields are marked *

Shopping Basket
Scroll to Top